U0462
Invalid Data Received From Compass Module
The compass module measures the earth's magnetic field, usually with two perpendicular sensors in the interior mirror or overhead console, and sends the heading to a display or navigation unit. Gentex patented a mirror compass of this kind with automatic calibration, compensation for magnetic disturbances inside the car and a link to the vehicle bus. U0462 is set when the receiving unit, for instance the instrument cluster, still gets compass messages but rejects them, for example because a counter or checksum fails or a value lies outside the possible range; if the messages stop, U0161 applies. No manufacturer documents U0462 publicly. The heading may show dashes or jump about; recalibration after a magnetic disturbance or a battery change sometimes helps. Driving is not affected and no MIL lights.
Possible causes
- Compass calibration lost or disturbed by magnetic influences, for example after a battery change or roof-mounted accessories high
- Loose plug at the interior mirror or overhead console medium
- Internal fault of the compass module or mirror electronics low
Symptoms
- Compass display shows dashes or wrong heading
- Heading jumps while driving
Inspection / repair
- Difficulty: easy
- DIY: possible
What Pro shows you for U0462
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 1 affected component(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.