OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Network generic / SAE

U045E

Invalid Data Received From Automated Driving System Control Module B

Control module B is the second unit of a split automated driving computer, and the two halves check each other. Stellantis documents U045E in STAR case S2508000095 for 2024-26 Jeep Wagoneer and Grand Wagoneer: the CADM and the global navigation and motion module store U045E-00 next to U015D-00, Ethernet link errors and time synchronisation faults, and the freeze-frame data name failed message checks on two internal processor paths. Replaced modules showed no defect; taut Ethernet cables had strained the plugs. Technicians inspect plugs and pins, replace the harness without splicing and set clip C121 to the specified distances. U015D would mean B is silent, U045D covers module A. Customers see a blind spot alert unavailable message, lit mirror warning lamps and switched-off assistance; this case names no MIL.

SystemNetwork
Typegeneric / SAE
GroupU0
Range / number4 / 5E

Possible causes

  • Ethernet cable routed too tight, straining plugs and pins at the ADAS modules high
  • Harness clip at the ADAS decision module outside the specified distance medium
  • Internal fault of ADAS control module B low

Symptoms

  • Blind spot alert unavailable message
  • Blind spot lamps in the mirrors stay lit
  • Driver assistance features disabled

Inspection / repair

  • Difficulty: shop only
  • DIY: shop recommended

What Pro shows you for U045E

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 1 affected component(visible in Pro mode)
  • 1 warning for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication