U045C
Invalid Data Received From Power Steering Control Module B
Power steering module B is the second controller of a redundant electric steering system. Bosch presented a fail-operational EPS for highly automated driving in 2017: if one path fails, the system can still steer the car to a safe stop or spare the driver a sudden rise in steering effort. U045C is set when the partner, typically steering module A or the automation computer, gets messages from B but finds them invalid, for instance a frozen counter or a mismatching CRC under AUTOSAR end-to-end protection; complete silence from B is U015B, and invalid data from module A is U0420. No manufacturer documents U045C publicly. Assisted steering usually continues on path A, but a steering warning and blocked automated steering are likely until the cause is found.
Possible causes
- Software or calibration of steering module B not matching module A high
- Voltage dips or poor ground at the second steering path medium
- Internal fault of steering module B low
Symptoms
- Steering system warning
- Lane centring or automated steering unavailable
- Steering assist reduced in some cases
Inspection / repair
- Difficulty: shop only
- DIY: shop recommended
What Pro shows you for U045C
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 1 affected component(visible in Pro mode)
- 1 warning for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.