OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Network generic / SAE

U045B

Invalid Data Received From Anti-Lock Brake System (ABS) Control Module B

ABS module B is a second brake controller, found where braking has to survive a single fault. Bosch pairs an electromechanical booster or its integrated power brake with ESP for that purpose and, for automated driving, adds a separate redundant brake unit; its 2018 show message was that automated driving needs redundancy. U045B is stored when the partner, often the main brake unit or the automated driving computer, receives status or wheel data from B but rejects them because counters, checksums or values do not fit; U015A means B is silent, U0415 concerns the main ABS module. No manufacturer documents U045B publicly. Normal braking usually remains through the other path, yet a brake warning may appear and anything that relies on redundancy, such as automated or hands-off driving, is blocked.

SystemNetwork
Typegeneric / SAE
GroupU0
Range / number4 / 5B

Possible causes

  • Software levels of brake module A and B or the automation computer not matching high
  • Weak supply or ground of brake module B medium
  • Internal fault of brake module B low

Symptoms

  • Brake system or ABS warning
  • Automated or hands-off driving functions unavailable

Inspection / repair

  • Difficulty: shop only
  • DIY: shop recommended

What Pro shows you for U045B

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 1 affected component(visible in Pro mode)
  • 1 warning for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication