U0459
Invalid Data Received From Head Up Display
The head-up display shows speed, route arrows or warnings as a virtual image in the windscreen. It takes most content from other modules and reports its own state, such as brightness, image position, page or standby, back over the vehicle bus or a LIN link to the cluster. U0459 is set when a partner receives HUD data that fail its checks; U0158 means the HUD is not heard at all. No manufacturer documents U0459 publicly. GM shows how near the two faults lie: in bulletin 22-NA-113 for 2020-22 Cadillac CT4 and CT5 with option UV6, badly timed LIN messages while the HUD entered standby left it blank and stored U0158 in the cluster, cured by reprogramming the cluster and pulling the HUD fuse. The 2011 Saab 9-5 code table lists the HUD as a separate node. Symptom: blank or frozen projection; no MIL.
Possible causes
- Software of the cluster or HUD handling messages badly, for example around standby high
- HUD shutting down or sending fault status because of heat medium
- Connector or LIN/bus wiring fault at the HUD low
Symptoms
- Head-up display blank or frozen
- Brightness, position or page settings have no effect
Inspection / repair
- Difficulty: medium
- DIY: shop recommended
What Pro shows you for U0459
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 1 affected component(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.