OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Network generic / SAE

U0458

Invalid Data Received From Information Center B

U0458 covers the second driver information display, information center B, which J2012 keeps apart from center A, the instrument cluster and the head-up display; which physical screen a maker calls B, for example a passenger or rear-seat display, is its own decision. A receiving module logs the code when frames from B arrive but fail plausibility, such as a stuck alive counter or a wrong CRC as described in the AUTOSAR end-to-end protocol; if no frames come at all, U0157 is set instead. No manufacturer documents U0458 publicly, and none of the bulletins checked names its lost-contact twin U0157 either. Since such a display only presents information, the effect is normally limited to missing or frozen content on that one screen, with no MIL and no limp mode.

SystemNetwork
Typegeneric / SAE
GroupU0
Range / number4 / 58

Possible causes

  • Software fault or unsuitable software level in display B high
  • Loose connector or damaged bus wiring to display B medium
  • Internal fault of display B low

Symptoms

  • Second display blank, frozen or showing wrong values
  • Functions operated through that display unavailable

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for U0458

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 1 affected component(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication