OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Network generic / SAE

U0453

Invalid Data Received From Side Restraints Control Module - Left

U0453 concerns a side restraints control module for the left side, used where side impact sensing or the firing of side and curtain airbags is handled by a separate unit next to the main restraints module. A receiver, usually the main restraints module, sets U0453 when the left unit's crash or status data are invalid; U0152 is lost contact, U0454 covers the right side. No manufacturer documents U0453 publicly. FMVSS 214 regulates side impact protection, and FMVSS 208 requires a readiness indicator, visible to the driver, that supervises deployable occupant protection, which is why an airbag warning lamp is the expected symptom; protection on the left side may be reduced until repair. For the main module (U0452), GM's tables use counter and protection checks without MIL.

SystemNetwork
Typegeneric / SAE
GroupU0
Range / number4 / 53

Possible causes

  • Loose or corroded connector of the left side unit, for example under the seat or in the B-pillar high
  • Software or configuration of the left unit not matching the main restraints module medium
  • Internal fault of the left side restraints unit, often after a side impact low

Symptoms

  • Airbag warning lamp on
  • Side or curtain airbag on the left possibly not available

Inspection / repair

  • Difficulty: shop only
  • DIY: shop recommended

What Pro shows you for U0453

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 1 affected component(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication