U044F
Invalid Data Received From Mirror Control Module B
U044F is stored when a controller receives data from mirror control module B that it cannot use; U014D is lost contact, U0514 covers module A. Depending on design, mirror modules adjust, fold and heat the exterior mirrors, store memory positions or run an interior mirror with camera display. Stellantis shows how the letters are assigned: case S2108000013 for the 2021 Jeep Grand Cherokee names module A as the combined rear view mirror module inside the cabin, whose lost-contact code U0213 sets in the BCM after a configuration restore wrongly enables a mirror that is not fitted. No manufacturer documents U044F publicly. FMVSS 111 sets the rear visibility rules such mirrors serve. Expect memory, folding, dimming or display functions handled by module B to stop working.
Possible causes
- Vehicle configuration does not match the fitted mirror modules medium
- Damaged wiring in the door hinge area or loose mirror connector medium
- Internal fault of mirror control module B, often after water entry low
Symptoms
- Mirror adjustment, folding or memory function inoperative
- Camera mirror display or automatic dimming unavailable
Inspection / repair
- Difficulty: medium
- DIY: shop recommended
What Pro shows you for U044F
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 1 affected component(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.