U044D
Invalid Data Received From Generator B Control Module
U044D names the generator B control module. Ford uses the A version for its LIN-controlled alternator: in SSM 50737, 2021-22 F-150 trucks with the 2.7L EcoBoost warn about the charging system and store U012D and U042E in the PCM because a LIN wire rubs through to ground close to the engine mount on the left. A B unit would then be the regulator of a second alternator, as found on trucks with dual generators; Ford's 2014 code list already contains circuit codes for generator 2. U044D is set when that regulator answers but its status, load or fault data are invalid; U012F is lost contact. No manufacturer documents U044D publicly. The engine computer then cannot steer the second alternator reliably, so charging capacity may drop and a battery or charging warning may appear.
Possible causes
- Chafed or shorted LIN wire to the second alternator high
- Faulty voltage regulator of alternator B medium
- Second alternator not configured correctly in the engine computer low
Symptoms
- Battery or charging system warning
- Low charging voltage under high electrical load
Inspection / repair
- Difficulty: medium
- DIY: shop recommended
What Pro shows you for U044D
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 2 affected components(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.