U044B
Invalid Data Received From Battery Energy Control Module C
A third battery controller, module C, appears where a pack is divided into separately managed sections or a vehicle has more than one battery system. A receiver, typically the hybrid or vehicle controller, sets U044B when C's frames on cell voltages, temperatures, state of charge or contactor status fail validity checks; U014A is lost contact, U0412 and U0413 cover modules A and B. No manufacturer documents U044B publicly. Volkswagen group documents number such controllers: Bentley bulletin 2051553/2 for the 2017-18 Bentayga logs battery and sensor faults under battery management 2, the unit serving the dynamic ride roll control. Expect reduced electric power or a hybrid system warning, since the receiver cannot rely on the pack data.
Possible causes
- Software of battery module C not matching the vehicle controller medium
- Faulty cell or temperature sensing inside the pack section managed by C medium
- Bus wiring, connector or 12 V supply fault at module C low
Symptoms
- Hybrid or battery system warning
- Reduced electric power or range
- Functions supplied by the affected battery switched off
Inspection / repair
- Difficulty: shop only
- DIY: shop recommended
What Pro shows you for U044B
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 2 affected components(visible in Pro mode)
- 1 warning for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.