OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Network generic / SAE

U0449

Invalid Data Received From Serial Data Gateway Module C

U0449 points at serial data gateway module C; its lost-contact partner is U0148. The receiver logs it when C keeps transmitting, yet the content breaks the rules agreed for that message, for instance a wrong length, a frozen counter or a bad checksum. No manufacturer documents U0449 publicly. How strictly receivers police gateway traffic is visible at GM: in one 2024 table the ECM checks the data length code of several frames that the gateway forwards from two CAN buses, and a wrong length lasting 10 s sets the gateway A code as a two-trip fault, while a missing frame sets a separate maker-specific code. A third gateway mostly appears in vehicles with many separate networks. Symptoms depend on which networks C joins; several unrelated warnings at once are typical.

SystemNetwork
Typegeneric / SAE
GroupU0
Range / number4 / 49

Possible causes

  • Gateway C software sends frames in a layout the receiver does not expect medium
  • Wiring, termination or connector fault on a network served by gateway C medium
  • Low voltage or poor ground at gateway C low

Symptoms

  • Several unrelated warnings in the cluster
  • Functions on one network segment unavailable

Inspection / repair

  • Difficulty: shop only
  • DIY: shop recommended

What Pro shows you for U0449

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 2 affected components(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication