OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Network generic / SAE

U0448

Invalid Data Received From Serial Data Gateway Module B

U0448 concerns serial data gateway module B, a second gateway that some architectures add next to the central unit to bridge further networks; U0147 is lost contact with it. A receiver stores U0448 when B's frames arrive but alive counter, checksum or message authentication do not match. No manufacturer documents U0448 publicly. For gateway A, GM's 2025 tables show what such checks look like: a few failed samples within a short window, MIL treatment that varies by receiver, and assistance functions such as adaptive cruise switched off as a fallback. Audi's Q4 e-tron bulletin shows a faulty gateway leaving several modules reporting it at the same time. Because every message routed through B is affected, symptoms tend to appear on several systems together; software level and supply of module B come first in diagnosis.

SystemNetwork
Typegeneric / SAE
GroupU0
Range / number4 / 48

Possible causes

  • Software level of gateway B not matching the other modules medium
  • Supply or ground fault at gateway B medium
  • Internal fault in gateway module B low

Symptoms

  • Warnings from several systems at the same time
  • Assistance or comfort functions on the networks behind gateway B unavailable

Inspection / repair

  • Difficulty: shop only
  • DIY: shop recommended

What Pro shows you for U0448

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 1 affected component(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication