OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Network generic / SAE

U0447

Invalid Data Received From Serial Data Gateway Module A

As the central gateway, serial data gateway module A links the vehicle networks and forwards messages between them. U0447 means a receiver gets gateway frames with failed protection; for lost contact the code is U0146. In GM's 2025 tables, many receiving modules run this test: the ECM checks rolling count, protection value and checksum of backup power mode signals, a Type B code (two trips) follows after 3 bad samples out of 10, the TCM uses Type A; camera and radar modules allow 0.625 s, stay non-MIL and drop adaptive cruise. GM bulletin 23-NA-206 lists U0447 among history codes to ignore. Audi bulletin 2069299 for 2022-24 Q4 e-tron finds U044700 in both brake modules while the engine module reports U014600, and replaces gateway J533. VW reports it in the ECM of 2013-19 Golf models.

SystemNetwork
Typegeneric / SAE
GroupU0
Range / number4 / 47

Possible causes

  • Gateway hardware or software fault, update or replacement of the gateway high
  • Receiver software logs the code without a real fault (history entry) medium
  • Low battery voltage or poor ground at the gateway during wake-up or power mode changes medium

Symptoms

  • Several warning messages in the instrument cluster at once
  • Adaptive cruise or camera-based assistance unavailable
  • Check engine light on in vehicles that rate the fault as MIL-relevant

Inspection / repair

  • Difficulty: shop only
  • DIY: shop recommended

What Pro shows you for U0447

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 2 affected components(visible in Pro mode)
  • 2 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication