OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Network generic / SAE

U0443

Invalid Data Received From Body Control Module B

U0443 is set when a receiver gets frames from body control module B but rejects their content. The letters B to E come into play when a vehicle spreads body electronics such as lighting, locks, wipers or power distribution over several controllers; module A has U0431, a single BCM U0422, and lost contact with B is U0142. No car maker explains publicly which unit carries the letter B. Harley-Davidson uses the code on motorcycles: bulletin M1619 reports U04438F (failure type 8F, erratic) stored by the left hand control module shortly after start-up, alongside U04318F in the right hand module. As history entries they need no repair and await new software; if they are current, normal diagnosis applies. In cars, invalid data from module B tends to disable single comfort functions or trigger warnings.

SystemNetwork
Typegeneric / SAE
GroupU0
Range / number4 / 43

Possible causes

  • Software of module B or of the receiver sets the code without a real fault high
  • Loose connector or damaged network wiring at body control module B medium
  • Supply or ground problem at body control module B low

Symptoms

  • Single comfort or lighting functions unavailable
  • Code stored as history right after start-up without complaint

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for U0443

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 2 affected components(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication