OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Network generic / SAE

U043C

Invalid Data Received From Front Distance Range Sensor - Right

U043C is the right-hand counterpart: invalid frames from the right front distance sensor, a corner radar on cars that pair one long-range radar with two short-range units. Finding only U043C points at that sensor, its plug or its mounting area, for example after a light knock on the right bumper corner; U043B and U043C together suggest a shared supply, bus segment or a software issue in the receiver. There is no public manufacturer documentation of U043C and no known threshold. In GM's 2025 EOCM3 tables the right front short-range radar is checked only for message loss, under U023E: more than 0.2 s without frames ends adaptive cruise, special Type C. Functions relying on the right corner view are reduced, others may stay available. U023E is lost contact.

SystemNetwork
Typegeneric / SAE
GroupU0
Range / number4 / 3C

Possible causes

  • Right corner radar knocked out of alignment or damaged medium
  • Shared supply or bus segment fault when both corner codes appear medium
  • Moisture or corrosion in the right sensor connector low

Symptoms

  • Assistance functions using the right front view switched off
  • Sensor blocked or check sensor message

Inspection / repair

  • Difficulty: shop only
  • DIY: shop recommended

What Pro shows you for U043C

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 1 affected component(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication