OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Network generic / SAE

U043A

Invalid Data Received From Suspension Control Module B

Suspension control module B is a second chassis controller, often the one that runs adjustable dampers while module A handles levelling. U043A is logged when its frames reach a receiver but fail integrity checks. GM's 2025 tables give the example of the electronic brake module reading the damper control information: a rolling count equal to the previous one or a protection value that does not add up counts as an error, and 8 errors in a sliding window of 16 set the fault. The check runs only between 9 and 16 V, not during engine start and not within 5 s after a power mode change or reset; it is Type C, so no MIL. Ride control may drop to a fixed default and stability functions may be restricted. U0139 is lost contact, U0421 refers to module A.

SystemNetwork
Typegeneric / SAE
GroupU0
Range / number4 / 3A

Possible causes

  • Damper module resets or hangs, sending frozen counters medium
  • Low supply voltage at the suspension module medium
  • Software of suspension and brake modules not matched low

Symptoms

  • Service suspension or ride control warning
  • Ride noticeably firmer or softer than usual

Inspection / repair

  • Difficulty: shop only
  • DIY: shop recommended

What Pro shows you for U043A

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 1 affected component(visible in Pro mode)
  • 1 warning for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication