OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Network generic / SAE

U0435

Invalid Data Received From Power Steering Control Module - Rear

U0435 refers to the rear power steering module, the controller of active rear-wheel steering. A receiver sets it when the module's status or angle frames arrive but are unusable. GM bulletin 17-NA-130 explains one case on the 2016-17 Cadillac CT6: during a remote start the rear steer module had not yet initialised while the brake module already expected its data, so the EBCM stored U0435 and showed a Service Soon message; new EBCM software is the fix. Porsche's workshop campaign WE14 for the 2014 911 Turbo reflashes both rear-axle steering units after a software error; with the fault active the actuators lock in the straight position and the car behaves like one with fixed rear links until the next ignition cycle. U0134 is lost contact; U0420 covers power steering module A.

SystemNetwork
Typegeneric / SAE
GroupU0
Range / number4 / 35

Possible causes

  • Rear steering module not yet ready when receivers expect data, e.g. at remote start high
  • Software error in rear steering or brake module medium
  • Low voltage or poor connector at the rear steering unit low

Symptoms

  • Service Soon or rear steering fault message
  • Larger turning circle, rear wheels held straight

Inspection / repair

  • Difficulty: shop only
  • DIY: shop recommended

What Pro shows you for U0435

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 1 affected component(visible in Pro mode)
  • 1 warning for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication