OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Network generic / SAE

U0433

Invalid Data Received From Front Distance Range Sensor - Single Sensor or Center

U0433 concerns the forward distance sensor of adaptive cruise control when there is only one or when it sits in the middle, usually a long-range radar behind the grille. A receiver stores it when the radar's object frames fail their protection checks or carry implausible values. GM's 2025 tables describe the EOCM3 assistance controller testing six protected radar burst messages for wrong counter, checksum or authentication code; it reacts after errors in 3 of 4 messages, judged over about 0.03 s of a 0.04 s window and only at 9 to 16 V, and then switches adaptive cruise off as a special Type C fault without MIL. Ford's 2014 code list carries U0433 without lamp marking. For the driver, cruise and collision warning become unavailable. U0235 is lost contact; left and right sensors use U043B and U043C.

SystemNetwork
Typegeneric / SAE
GroupU0
Range / number4 / 33

Possible causes

  • Radar misaligned after front-end work or impact, sending implausible objects medium
  • Radar or assistance controller software out of step medium
  • Low supply voltage or poor connector at the radar low

Symptoms

  • Adaptive cruise control switched off
  • Forward collision warning or emergency braking unavailable

Inspection / repair

  • Difficulty: shop only
  • DIY: shop recommended

What Pro shows you for U0433

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 1 affected component(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication