OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Network generic / SAE

U042F

Invalid Data Received From Camshaft Position Control Module

U042F concerns a camshaft position control module, used where an electric motor with its own electronics moves the phaser instead of an oil valve. The engine controller commands a target angle and receives actual position and status; U042F means those replies arrive but fail plausibility or protection checks, while U012E is set when they stop. For the 2022 Outlander, Mitsubishi's TSB-23-11-003 lists U042F beside U012E, U0101, U0122, U0146 and U0155 among the engine controller's network codes, and its parts list for that engine includes an electric intake valve timing control module. No maker documents more. CARB requires variable valve timing to be monitored for target errors and slow response. Without trusted feedback the controller holds intake timing at a default; expect a MIL, less power and higher emissions.

SystemNetwork
Typegeneric / SAE
GroupU0
Range / number4 / 2F

Possible causes

  • Electric valve timing control module faulty medium
  • Supply, ground or connector fault at the module medium
  • Engine controller software misjudging the module data low

Symptoms

  • Check engine light
  • Reduced power and rougher idle
  • Higher fuel consumption

Inspection / repair

  • Difficulty: shop only
  • DIY: shop recommended

What Pro shows you for U042F

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 1 affected component(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication