U042D
Invalid Data Received From Active Vibration Control Module
The active vibration control module drives active engine mounts or inertial actuators that push against engine vibration in counter-phase, useful with cylinder deactivation. It needs engine speed and other data from the bus and reports its own status back. U042D says a partner receives its frames but finds them invalid. No manufacturer documents U042D publicly. Honda's patent US 10,360,893 describes such a controller that adapts its cancelling output by adaptive filtering and also reads vehicle speed, blower air volume and window state. Bentley shows it is a separate box: fitting newer mounts on a 2017-2020 Bentayga calls for a new program or a new controller for the active mounts, since the old software does not suit them (2055760/1). U012C is lost contact. Expect more vibration; no MIL.
Possible causes
- Control unit software not matching replaced mounts or actuators medium
- Active vibration control module faulty medium
- Low supply voltage or poor connection at the module low
Symptoms
- Noticeable vibration or humming at idle
- More body vibration when cylinders are deactivated
Inspection / repair
- Difficulty: shop only
- DIY: shop recommended
What Pro shows you for U042D
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 1 affected component(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.