OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Network generic / SAE

U042C

Invalid Data Received From Chassis Control Module B

U042C refers to a second chassis controller, labelled B, where chassis tasks are split between two units. It is stored when that module's frames still arrive but carry a bad counter, checksum or implausible values. No manufacturer documents U042C or the B module publicly; the only public assignment found concerns module A, which GM's 2020 transmission tables equate with the integrated chassis control module. CARB asks emission-related controllers to flag faulty digital communication as well as its absence, which mirrors the pair U012B and U042C, although a chassis unit usually lies outside that rule. B alone points to that module or its harness, B with U042B to shared supply, gateway or bus wiring. A MIL is not expected; chassis messages are likely. U012B is lost contact.

SystemNetwork
Typegeneric / SAE
GroupU0
Range / number4 / 2C

Possible causes

  • Software fault in chassis module B or the receiver medium
  • Supply, ground or gateway problem affecting the module's messages medium
  • Chassis control module B faulty low

Symptoms

  • Chassis or suspension warning in the cluster
  • Chassis function handled by module B inactive

Inspection / repair

  • Difficulty: shop only
  • DIY: shop recommended

What Pro shows you for U042C

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 1 affected component(visible in Pro mode)
  • 1 warning for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication