U0424
Invalid Data Received From HVAC Control Module
The HVAC control module reports climate requests and, on newer layouts, also the voltages of switches on the climate faceplate that it measures itself. U0424 says a receiver rejects these frames. GM documents the logic in the BCM of its 2025 vehicles: alive rolling counts, protection values, checksums or CRCs of the HVAC messages are checked every 10 ms, and 8 failures in 10 samples set a Type B fault once the BCM has been up for 5 s, the partial network has run for 3 s, power mode is Run and the battery has more than 11 V. As long as U0164 or U0424 is present the BCM suspends its faceplate switch tests (B2A01 and others), since their values come over CAN. GM's Saab 9-5 list (2011) contains U0424, and Ford marks it with the MIL in its 2014 code interpretation. U0164 is lost contact, U0324 software.
Possible causes
- HVAC control module or faceplate electronics faulty medium
- Low battery voltage or a reset of the HVAC module during start-up medium
- HVAC or BCM software level that needs an update low
Symptoms
- Climate controls or buttons react incorrectly or not at all
- A/C or defrost not available
- Check engine light on some makes
Inspection / repair
- Difficulty: shop only
- DIY: shop recommended
What Pro shows you for U0424
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 2 affected components(visible in Pro mode)
- 2 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.