U0423
Invalid Data Received From Instrument Panel Cluster Control Module
The instrument cluster does more than display: it sends outside temperature, display and chime status or confirmations from its menus to other units. U0423 marks cluster frames that arrive but fail the receiver's checks. In GM's 2025 driver assistance controller EOCM3, 8 of 10 bad frames on chime state, display status or speed limit confirmations set a Special Type C fault that turns adaptive cruise off. Volkswagen's 2014 Touareg book has the engine controller log U0423 when the cluster still reports the ambient temperature start value FEh. Toyota's T-SB-0270-17 for the 2017 iA lists U0423 in the ABS with U0323 and U3000 when battery or display was disconnected; TPMS and TCS/DSC lamps stay on. Honda saw U0423-68 with an auto high beam message on the 2017 CR-V. Ford's 2014 list marks it MIL. U0155 is lost contact.
Possible causes
- Battery, fuse or display disconnected so the cluster sends start values high
- Software fault in cluster or receiving module medium
- Another node on the same bus disturbing the cluster's messages low
Symptoms
- Stability, tire pressure or assistance warnings that cannot be cleared
- Adaptive cruise or auto high beam unavailable
- Check engine light on some makes
Inspection / repair
- Difficulty: shop only
- DIY: shop recommended
What Pro shows you for U0423
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 1 affected component(visible in Pro mode)
- 2 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.