U0420
Invalid Data Received From Power Steering Control Module A
U0420 is stored when a listener gets frames from power steering control module A, the electric assist unit on rack or column, yet judges their content unusable. GM's 2025 tables name several listeners: the ECM tests the steering wheel information for bad counter, protection value or checksum and needs 8 failures within 18 samples for a Type C fault with no MIL; the EBCM runs similar Type C tests, and the EOCM3 assistance controller checks torque overlay and assist status (3 of 4 or 6 of 10 frames) and switches adaptive cruise off. Mazda bulletin 15-003/20 blames U0420:68 in the front camera on low voltage during cranking, which spoils the EPS centre learning; new EPS software helps. Jeep 08-094-25 (2025 Wagoneer) reflashes the EPS when U0420-00 comes with a MIL. U0131 is lost contact, U0320 software.
Possible causes
- Low battery voltage during cranking corrupts steering module start-up data high
- Steering module or receiving module software needs an update medium
- Corroded connector or poor ground at the steering module low
Symptoms
- Adaptive cruise, lane keeping or emergency braking unavailable
- Stability control or steering warning in the cluster
- Code returns after cold starts with a weak battery
Inspection / repair
- Difficulty: shop only
- DIY: shop recommended
What Pro shows you for U0420
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 2 affected components(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.