OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Network generic / SAE

U041F

Invalid Data Received From Throttle Actuator B Control Module

U041F addresses throttle actuator B control module, a separately housed driver for a second electronic throttle. Most engines use one throttle driven directly by the engine controller; a separate driver for the first throttle is covered by U0408. The engine controller sets U041F when B's position or status frames arrive but disagree with plausibility checks or carry bad counters. No manufacturer documents U041F publicly, and production engines with such a split are not known. CARB demands rationality monitoring of digital inputs used by emission controls. If throttle data cannot be trusted, the controller limits airflow, often to a fixed limp-home opening. Expect MIL and reduced power. U011E is lost contact, U0308 a software mismatch with a throttle controller.

SystemNetwork
Typegeneric / SAE
GroupU0
Range / number4 / 1F

Possible causes

  • Position feedback of throttle actuator B implausible (sensor or gearbox wear) medium
  • Throttle actuator B control module internally faulty medium
  • Connector or bus wiring fault at module B low

Symptoms

  • Check engine light
  • Reduced power or limp-home mode

Inspection / repair

  • Difficulty: hard
  • DIY: shop recommended

What Pro shows you for U041F

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 2 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication