OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Network generic / SAE

U041D

Invalid Data Received From Rocker Arm Control Module B

U041D is the counterpart for rocker arm control module B, used where the switching of rocker arms is split, for instance by cylinder bank. The code tells that the engine controller still receives B's messages, but their lift or lock status cannot be trusted. Comparing with U041C helps: B alone points to that module, its harness branch or its solenoids, both together to the shared supply or the bus. No manufacturer documents U041D publicly and no thresholds are known. CARB requires monitoring of variable valve lift and plausibility checks of digital inputs. Likely effects: MIL, cylinders on the B side held in full-lift mode, higher fuel use and perhaps rough running. U011C is lost contact.

SystemNetwork
Typegeneric / SAE
GroupU0
Range / number4 / 1D

Possible causes

  • Switching solenoid or oil supply on the B side faulty medium
  • Rocker arm control module B internally faulty medium
  • Shared supply or bus fault (then usually with U041C) low

Symptoms

  • Check engine light
  • Uneven running or higher fuel use

Inspection / repair

  • Difficulty: hard
  • DIY: shop recommended

What Pro shows you for U041D

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 2 affected components(visible in Pro mode)
  • 2 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication