U041B
Invalid Data Received From Exhaust Gas Sensor Module A
U041B names exhaust gas sensor module A, an electronic unit that heats and evaluates an exhaust probe, usually a wide-band oxygen sensor, and sends the result as bus data. The engine controller sets the code when the module still talks but its values fail plausibility, carry wrong counters or report the sensor as not ready. No manufacturer documents U041B publicly. Chrysler shows such a module on the Cummins 6.7 L in 2010-2012 Ram heavy-duty pickups: bulletin 25-002-14 lists its lost-communication code U011A among oxygen sensor faults and fits an overlay harness to the module before parts are replaced. CARB requires digital inputs of emission controls to be checked for out-of-range and rationality faults. Expect the MIL and closed-loop or aftertreatment functions held back. U046E is module B.
Possible causes
- Heat-damaged sensor harness or connector at the sensor module medium
- Aged or contaminated probe giving implausible readings medium
- Exhaust gas sensor module internally faulty low
Symptoms
- Check engine light
- Higher fuel use or regeneration problems on diesels
Inspection / repair
- Difficulty: hard
- DIY: shop recommended
What Pro shows you for U041B
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 2 affected components(visible in Pro mode)
- 2 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.