OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Network generic / SAE

U0418

Invalid Data Received From Brake System Control Module A

U0418 says a node rejects the content of frames from brake system control module A, on many cars the unit that combines ABS, stability control and brake boost. GM's 2025 tables are detailed: the engine controller tests brake status signals for bad counters, protection values or checksums, 8 faults in 18 checks give Type A with MIL after one trip; the TCM runs the same test as Type B, the BCM demands 15 bad of 16, and the front camera rates its check Special Type C and only disables adaptive cruise. Saab's 9-5 list adds sub-types 71, 72 and 74. FCA notes for the 2021 Jeep Cherokee 2.4 L that U0418 may set falsely below 10 V and reflashes the PCM (18-078-22); BrightDrop 24-NA-107 forbids repairs for it on the Zevo 600. U0129 is lost contact, U0318 software.

SystemNetwork
Typegeneric / SAE
GroupU0
Range / number4 / 18

Possible causes

  • Low battery voltage (below about 10 V) during start or standstill high
  • Engine or transmission controller software reacting too sensitively; update available medium
  • Loose connector or harness fault disturbing the chassis bus medium
  • Brake system control module internally faulty low

Symptoms

  • Check engine light
  • Adaptive cruise, stop-start or driver assistance unavailable
  • Brake or stability warning in the cluster

Inspection / repair

  • Difficulty: hard
  • DIY: shop recommended

What Pro shows you for U0418

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 2 affected components(visible in Pro mode)
  • 2 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication