OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Network generic / SAE

U0417

Invalid Data Received From Park Brake Control Module

U0417 covers implausible data from the park brake control module, the controller of an electric parking brake that clamps the rear calipers by motor and reports apply state and faults on the bus. A receiver stores it when these frames arrive with a bad counter, checksum or an invalid value. No manufacturer explains U0417 in public documents. GM lists it only among history codes of the 2014 Cadillac ELR (PIC5988) that should not lead to replaced or reprogrammed parts unless they can be reproduced. GM's 2025 tables also show that the park brake apply status may be judged under U0418 instead: the front camera module counts it among brake signals whose protection may fail in 3 of 4 messages. U0128 is lost contact, U0317 software. Expect a park brake warning, disabled auto-apply or hill-hold functions and no MIL.

SystemNetwork
Typegeneric / SAE
GroupU0
Range / number4 / 17

Possible causes

  • Low battery voltage or a voltage dip corrupting park brake messages medium
  • Park brake control module or its actuator feedback faulty medium
  • Connector or wiring fault in the park brake bus branch low

Symptoms

  • Park brake warning lamp or message
  • Auto hold or hill start assist unavailable
  • Code only stored in history without current fault

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for U0417

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 2 affected components(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication