OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Network generic / SAE

U0416

Invalid Data Received From Vehicle Dynamics Control Module

U0416 points at the vehicle dynamics control module, the stability control unit that brakes single wheels and trims engine torque. A receiver logs the code when that unit's frames arrive but fail the plausibility check. GM's 2011 Saab 9-5 list adds sub-types 72 (counter wrong) and 74 (checksum error); Ford's 2014 code list carries U0416 without a lamp. Driver assistance suffers most: Honda bulletin 17-064 lists U0416-68 and U0416-92 on the 2017 CR-V after battery work, with adaptive cruise and brake warnings, and cures it with new radar software; Mercedes (LI54.71-P-078112) finds U0416FE in the Distronic unit of the G-Class, tied to weak battery health and gone after a key cycle. U0122 is lost contact, U0316 software. Assist systems switch off, the MIL normally stays dark.

SystemNetwork
Typegeneric / SAE
GroupU0
Range / number4 / 16

Possible causes

  • Weak or recently disconnected 12 V battery disturbing the stability unit's data high
  • Software of the receiving assistance module (radar, camera) needs an update medium
  • Steering angle or sensor calibration lost after battery work medium
  • Missing or damaged wire or connector in the bus branch low

Symptoms

  • Adaptive cruise or emergency brake assist unavailable
  • Stability or brake warning in the cluster

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for U0416

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 2 affected components(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication