OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Network generic / SAE

U0415

Invalid Data Received From Anti-Lock Brake System (ABS) Control Module

U0415 means a module accepts frames from the ABS control module only to find their content invalid, typically wheel speeds or brake status with a wrong counter, checksum or a value flagged as unavailable. GM's Saab 9-5 list (2011) splits it into sub-types 72 (message counter) and 74 (checksum) for the electronic brake module. Ford's 2014 code list gives it both MIL and wrench lamp. The storing module varies: Ford SSM 51489 says a 2023 F-Super Duty AWD module may log U0415 in self-test when no valid ABS signal arrives in time, harmless without MIL or other codes; FCA cures U0415-00 with MIL and a Service Transmission message on the 2025 Jeep Compass 2.0 L by TCM software (21-043-25). U0121 is lost contact, U0315 a software mismatch.

SystemNetwork
Typegeneric / SAE
GroupU0
Range / number4 / 15

Possible causes

  • Software of the receiving module (TCM, AWD, steering) too strict or faulty; update available high
  • ABS module passing on implausible values, for example from a faulty wheel speed sensor medium
  • Disturbed CAN traffic from water in connectors, wiring or low voltage medium

Symptoms

  • ABS, traction or stability warning lamps
  • Check engine light and Service Transmission message (model-specific)
  • AWD, steering or camera functions limited

Inspection / repair

  • Difficulty: hard
  • DIY: shop recommended

What Pro shows you for U0415

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 2 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication