OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Network generic / SAE

U040C

Invalid Data Received From Exhaust Gas Recirculation Control Module B

U040C concerns a second, separately networked EGR control unit, B. Two units appear on engines with separate high- and low-pressure recirculation paths, common on modern diesels, or with one EGR valve per cylinder bank; which one counts as B is up to the maker. The engine controller logs U040C when module B keeps talking but its content fails validation, while module A may still deliver clean data, which narrows the search to B's branch. Public manufacturer material and the NHTSA bulletins are silent on U040C, so its limits are not known; checks of counter and checksum as in GM's 2025 tables are the common pattern. With one EGR path unverified the controller usually closes it, NOx rises, and the MIL is expected because CARB treats EGR as a monitored system. U010B is lost contact, U040B module A.

SystemNetwork
Typegeneric / SAE
GroupU0
Range / number4 / 0C

Possible causes

  • Electronics or position sensor of EGR actuator B delivering implausible values medium
  • Connector or bus line in the branch of module B damaged by heat or moisture medium
  • Module B with software that does not match the engine controller low

Symptoms

  • Check engine light
  • Reduced power, more smoke or higher fuel consumption

Inspection / repair

  • Difficulty: hard
  • DIY: shop recommended

What Pro shows you for U040C

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 1 affected component(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication