OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Network generic / SAE

U040A

Invalid Data Received From Air Conditioning Control Module

J2012 separates the air conditioning control module, which governs the refrigerant side with compressor, pressures and, in electrified cars, an electric compressor drive, from the HVAC module that handles blower, flaps and set temperature (invalid data from that one is U0424). U040A is stored when frames from the A/C unit arrive but carry values the receiver cannot trust, such as a failed counter or checksum or a signal outside its range. No manufacturer documents U040A publicly. GM confirms the module itself: the 2011 Saab 9-5 code list carries U010F for lost contact with it, and GM's generic routine for U0400-U05FF reprograms the named module and replaces it only if the code returns. The compressor is likely held off, so cooling and demisting suffer; engine and emissions stay unaffected. U010F is lost contact.

SystemNetwork
Typegeneric / SAE
GroupU0
Range / number4 / 0A

Possible causes

  • Software of the A/C control module or of the receiver out of step medium
  • Faulty pressure or temperature input making the module send invalid values medium
  • Disturbed bus line, poor ground or low supply voltage at the module medium
  • A/C control module internally faulty low

Symptoms

  • Air conditioning blows warm, compressor stays off
  • Windows demist slowly

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for U040A

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 1 affected component(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication