OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Network generic / SAE

U0353

Software Incompatibility With Ion Sense Module

An ion sense module places a small voltage across the plug gap after each spark and turns the resulting ion current into combustion, knock and misfire information for the engine controller; Ford's patent US20170030322A1 shows such a unit inside the ignition system. U0353 says the engine controller has found software or a calibration in this module that does not match its own, typically after a module swap or a one-sided update. No manufacturer documents U0353 publicly. Stellantis' 3.0 L Hurricane six shows how tightly the parts depend on software: bulletin 18-004-24 cures P2F64 (ion sense feedback circuit A) with PCM software, and 08-205-24 reflashes ignition module and PCM together. CARB demands a calibration ID for each emission-related unit; without accepted ion data misfire detection loses its basis, so a MIL is likely.

SystemNetwork
Typegeneric / SAE
GroupU0
Range / number3 / 53

Possible causes

  • Engine controller or ion sense module updated without the matching partner software high
  • Replacement ion sense module with another part number or calibration medium
  • Programming of one of the two units interrupted or incomplete low

Symptoms

  • Check engine light
  • Misfire or knock codes stored at the same time
  • Code appears right after a module replacement or reflash

Inspection / repair

  • Difficulty: shop only
  • DIY: shop recommended

What Pro shows you for U0353

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 1 affected component(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication