OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Network generic / SAE

U0352

Software Incompatibility With NOx Sensor C

NOx sensor C is a third smart NOx sensor with its own electronics, fitted on exhaust systems with a second SCR stage, where it watches the gas behind the last catalyst. U0352 means the engine controller declines the software or calibration of this sensor, for example after a part meant for another engine or model year was fitted. No manufacturer documents U0352 publicly. GM's 2025 engine tables show that sensor C is real: the ECM expects five of its messages, logs U02A1 as Type B after more than 10 s without them and checks counter and checksum of its data (U05A8). CARB requires each emission-critical control unit to report a calibration ID and a verification number for its software. While sensor C is not accepted, the second SCR stage cannot be judged and readiness stays open. U030D and U030E cover sensors A and B.

SystemNetwork
Typegeneric / SAE
GroupU0
Range / number3 / 52

Possible causes

  • NOx sensor for another engine, model year or position fitted high
  • Engine controller updated to a level that expects another sensor software medium
  • Sensor C swapped with the sensor of another position low

Symptoms

  • Check engine lamp possible, depending on the maker's rating
  • SCR or catalyst readiness does not complete
  • Code appears right after a NOx sensor replacement

Inspection / repair

  • Difficulty: shop only
  • DIY: shop recommended

What Pro shows you for U0352

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 1 affected component(visible in Pro mode)
  • 1 warning for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication