U0351
Software Incompatibility With Active Grille Air Shutter Module D
Shutter module D is the fourth address the code list reserves for grille flap actuators and is relevant only where a front end has four independently driven flap groups. U0351 signals that the engine controller will not accept the software of that unit. No manufacturer documents U0351 or says where a unit D would sit, so the position is maker-specific. What is documented around it: Hyundai already splits the lower flaps of the 2026 Palisade into left and right actuators and stores codes for modules B and C when water reaches their plugs (26-01-026H), GM swaps shutters whose firmware misreports instead of reflashing them (PIT6133), and CARB requires the active time of such off-cycle features to be logged. Part number and software level of the fitted actuator should be checked first. U028C is lost contact, U058D invalid data.
Possible causes
- Flap actuator of group D with another part number or firmware fitted high
- Front end or bumper from another version fitted with different shutter equipment medium
- Engine controller calibration expects a different number of shutter modules low
Symptoms
- One flap group no longer opens or closes
- Air flap warning or check engine lamp depending on the maker
- No noticeable change in driving
Inspection / repair
- Difficulty: medium
- DIY: shop recommended
What Pro shows you for U0351
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 1 affected component(visible in Pro mode)
- 1 warning for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.