OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Network generic / SAE

U034D

Software Incompatibility With Vehicle Thermal Management Control Module

The vehicle thermal management control module commands pumps, valves and fans that keep battery, drive electronics and cabin at their target temperatures. U034D means a partner controller rejects its software or calibration. No manufacturer documents U034D publicly. Audi shows that the software of this unit counts for OBD: on the 2020 Q5 hybrid, thermal management control module 00C5 judged normal temperature differences as faults, stored P0C4300 and P0CE100 and lit the MIL until campaign 80C9 updated it. Porsche reprograms the thermal management unit TME of the Taycan from 2020 together with the high-voltage heater to make cabin heating more robust (WPS9). CARB wants the electronic components that cool or heat hybrid battery and inverter monitored. U02AB is lost contact, U05AC invalid data. Heating, charging or power may be limited.

SystemNetwork
Typegeneric / SAE
GroupU0
Range / number3 / 4D

Possible causes

  • Thermal management controller on an outdated software level high
  • Thermal management module replaced without programming medium
  • High-voltage heater or another partner updated without matching the thermal controller low

Symptoms

  • Weak cabin heating or cooling
  • Charging or drive power limited to protect the battery
  • Warning lamp with thermal or coolant codes stored

Inspection / repair

  • Difficulty: shop only
  • DIY: shop recommended

What Pro shows you for U034D

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 1 affected component(visible in Pro mode)
  • 2 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication