OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Network generic / SAE

U034B

Software Incompatibility With Brake Booster Control

Brake booster control is the electromechanical brake servo that replaces the vacuum booster and lets regenerative braking be blended in; in the VW group it is unit J539, which holds the pedal travel sensor and the motor position sensor (self-study 861213). Audi documents U034B00 on the 2025 A3 and S3: with servo software 0562 the unit logs U034B00 with symptom 500032 during the start phase, the engine controller adds P162400, a request to switch on the warning lamp, and the check engine light stays on. Audi blames the servo software, rules out part replacement and gives clearing the codes as the interim workaround (2076568/1); the booster keeps working. U025E is lost contact, U055F invalid data, and U031C names brake system control module B. Braking itself is unaffected.

SystemNetwork
Typegeneric / SAE
GroupU0
Range / number3 / 4B

Possible causes

  • Faulty software level in the electromechanical brake booster high
  • Brake booster unit replaced without programming or coding medium
  • Brake or engine controller updated without matching the booster low

Symptoms

  • Engine warning lamp stays on after starting
  • Request-MIL code stored in the engine controller
  • Code returns after clearing until new booster software is installed

Inspection / repair

  • Difficulty: shop only
  • DIY: shop recommended

What Pro shows you for U034B

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 1 affected component(visible in Pro mode)
  • 2 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication