OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Network generic / SAE

U0349

Software Incompatibility With Hybrid/EV Battery Interface Control Module P

P is the sixteenth and final letter; the following number, U034A, already names an engine disconnect clutch, so a pack with more than sixteen boards would need maker codes. No vehicle is publicly linked to U0349. A real case of out-of-date battery firmware comes from Rivian: in 2022 R1T trucks built from October 2021 to June 2022, an old BMS firmware version could block over-the-air updates, so campaign RCA-30-23-001 had technicians remove an underbody panel, read a serial label and escalate for a manual update. A version gap can thus stop the update path itself, which is why a mismatch needs the maker's flashing tool. CARB's hybrid rules cover cell sensing; battery-only vehicles fall outside OBD II. U01AF and U04B0 are P's partners.

SystemNetwork
Typegeneric / SAE
GroupU0
Range / number3 / 49

Possible causes

  • Battery firmware so old that over-the-air updates cannot be applied high
  • Sixteenth board replaced without matching software medium
  • Code confused with U034A, which belongs to another component low

Symptoms

  • Software updates fail or are not offered
  • Battery warning after battery service
  • Charging or power limited in severe cases

Inspection / repair

  • Difficulty: shop only
  • DIY: shop recommended

What Pro shows you for U0349

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 1 affected component(visible in Pro mode)
  • 2 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication