U0345
Software Incompatibility With Hybrid/EV Battery Interface Control Module L
L is the twelfth letter and thus the last board on packs with twelve, such as the twelve CSCs of BMW's i8, provided a maker counted them this way. The mismatch behind U0345 is easy to create during battery repair. Kia's bulletin ELE 151 for the 2011–2016 Optima Hybrid allows a BMS update only when the traction battery is swapped for a part number of the new generation, so that the controller logic matches the new pack; the right flash is confirmed by pack number and ROM ID, and the upgrade must run in manual mode, since auto mode is ruled out. Old pack, new logic or the reverse is exactly the pairing to avoid. U01AB is the code for a silent L, U04AC for implausible data from it.
Possible causes
- Battery controller logic and pack generation do not match high
- Update for new-generation packs applied to an old-generation pack medium
- Twelfth board replaced with a unit of another software level low
Symptoms
- Hybrid warning after high-voltage battery replacement
- Electric assist reduced
- MIL possible on hybrids
Inspection / repair
- Difficulty: shop only
- DIY: shop recommended
What Pro shows you for U0345
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 1 affected component(visible in Pro mode)
- 2 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.