U0343
Software Incompatibility With Hybrid/EV Battery Interface Control Module J
J, the tenth board, only appears on larger packs. BMW's i8 is a documented example with more than ten: the parts list in bulletin SI B61 02 16 counts twelve cell monitoring circuits, and the battery electronics SME carries a voltage plausibility code for each of them, numbered 1 to 12 (21F0F3 to 21F0FE). The bulletin's cause is a failed CAN link between one or more CSCs and the SME, after which the contactor in the battery opens and the car cannot be made ready. BMW numbers the boards itself and does not use U0343; whether any maker maps J onto a tenth board in this way is not published. CARB asks for codes down to the smallest unit replaceable in service. U01A9 and U04AA are J's partners.
Possible causes
- Tenth board carries software the battery controller does not accept high
- Replacement boards from different production batches combined medium
- Internal battery bus disturbs the identification of board J low
Symptoms
- Car will not become ready to drive
- High-voltage system switches off, contactor opens
- Drivetrain malfunction message
Inspection / repair
- Difficulty: shop only
- DIY: shop recommended
What Pro shows you for U0343
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 1 affected component(visible in Pro mode)
- 2 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.