OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Network generic / SAE

U0340

Software Incompatibility With Hybrid/EV Battery Interface Control Module G

G is the seventh board, a position GM's 2016–2019 plug-in hybrids really have: table 16OBDG02 describes eight interface modules on a UART daisy chain to the battery system module. That table publishes lost-contact and processor tests for every board, yet it holds no counterpart to the P1EB1 version check of the older VITM design and no U0340. For G, GM thus documents silence (U01A6), not a software conflict. The older four-board design is stricter: P1F06 to P1F09 make each slave return a key value computed by a seed-and-key algorithm and fail it when wrong values persist for 1 s within a 1.4 s window, Type B in the 2015 table. U04A7 is the invalid-data code for G.

SystemNetwork
Typegeneric / SAE
GroupU0
Range / number3 / 40

Possible causes

  • Seventh board replaced by a unit with another software level high
  • Battery system module reflashed without the boards being brought along medium
  • Disturbed daisy-chain link garbles the version data of board G low

Symptoms

  • Hybrid warning, MIL possible depending on the maker
  • Electric mode limited or unavailable
  • Other battery diagnostics paused while the code is active

Inspection / repair

  • Difficulty: shop only
  • DIY: shop recommended

What Pro shows you for U0340

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 1 affected component(visible in Pro mode)
  • 2 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication