U033E
Software Incompatibility With Hybrid/EV Battery Interface Control Module E
A fifth interface board exists, for example, in BMW's 330e plug-in hybrid of the F30 series: bulletin SI B61 25 17 lists voltage-measurement codes for cell supervision circuits 1 to 5 in the battery electronics SME, under BMW's own numbers 21F0C2 to 21F0C6. BMW replaces a CSC only if the fault is active, has been logged five times, or twice with the MIL lit, and once harness and cell voltages have been checked. Kia shows why software has to follow such parts: on the 2015–2017 Soul EV, a replaced battery pack or BMS may need a BMS update chosen by the installed part numbers and confirmed by ROM ID (TSB ELE 155). U033E would flag a fifth board whose software the master rejects; U01A4 and U04A5 cover silence and bad data.
Possible causes
- Fifth supervision board replaced without matching the controller software high
- Battery controller not updated to the part numbers now installed medium
- Boards of different production levels combined in one pack low
Symptoms
- Powertrain or hybrid warning, MIL possible on plug-in hybrids
- Fault stored after a battery or BMS repair
- Electric range or power temporarily limited
Inspection / repair
- Difficulty: shop only
- DIY: shop recommended
What Pro shows you for U033E
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 1 affected component(visible in Pro mode)
- 2 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.