U033C
Software Incompatibility With Hybrid/EV Battery Interface Control Module C
U033C names the third interface board. GM's closest published check is its own code P1EB1 in the VITM of the Volt: at power-up the controller compares its own software version with that of all slave boards and logs P1EB1 if any one does not fit, within 200 ms, with at least 9 V and no slave lost-communication fault active. The 2015 table enters it as one trip, the 2018 table as Type A, meaning a MIL after one failed drive. GM thus reports one summary code rather than one per board, and a letter code like U033C does not appear there. Where a maker does use the letter codes, C stands for the third board only; U01A2 covers lost contact with it, U04A3 invalid data.
Possible causes
- Board C carries a software version the battery controller does not list as compatible high
- Battery controller updated while the boards stayed on the old level medium
- Unstable low-voltage supply at power-up corrupts the version exchange low
Symptoms
- MIL possible on hybrids, as GM rates its comparable check Type A
- Hybrid or high-voltage battery warning after switching on
- Electric driving or charging restricted
Inspection / repair
- Difficulty: shop only
- DIY: shop recommended
What Pro shows you for U033C
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 1 affected component(visible in Pro mode)
- 2 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.