U033B
Software Incompatibility With Hybrid/EV Battery Interface Control Module B
Module B is the second interface board, and on GM's eAssist mild hybrids it is also the last: bulletin PIT5513D lists exactly two, K112A and K112B, for 2016–2018 Silverado and Sierra and the 2018 LaCrosse, both under the same part number 24282084. Since one spare fits either slot, the part number alone does not tell which position a board serves. FCA's 2017–2018 Pacifica Hybrid shows a related split with maker-specific codes P1A29 and P1A2A for cell supervisory circuits A and B; bulletin 08-047-20 clears them by reflashing the battery pack control module. Neither maker documents U033B itself. U01A1 means B is silent, U04A2 that its data are invalid.
Possible causes
- Board B replaced with a spare carrying another software level high
- Battery controller software older than the board it has to accept medium
- Identical boards A and B swapped during pack repair low
Symptoms
- Hybrid system or battery warning, often with the check engine lamp on PHEVs
- Electric assist or electric driving reduced
- Fault follows work on the battery pack
Inspection / repair
- Difficulty: shop only
- DIY: shop recommended
What Pro shows you for U033B
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 1 affected component(visible in Pro mode)
- 2 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.