OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Network generic / SAE

U033A

Software Incompatibility With Hybrid/EV Battery Interface Control Module A

U033A is the one code of this row that a manufacturer names in public. Volvo's bulletins for the battery-electric VNR Electric truck (KC-2288 of 2023, CBR-2288 of June 2024, the latter also valid for the Mack LRe) list it among faults that turn active right after the ESCM has been reprogrammed, together with missing-message codes for interface modules A to D. The cure is not a part but a second programming run, the routine that flashes the battery management unit. Module A is the first of the boards that report cell voltages and temperatures from inside the pack. Silence from A is U01A0, bad data U04A1. Volvo gives no MIL rating.

SystemNetwork
Typegeneric / SAE
GroupU0
Range / number3 / 3A

Possible causes

  • Battery management unit left on its old software after another controller was reprogrammed high
  • Programming session ended before all battery-related units were flashed medium
  • Interface module A replaced and not brought to the matching level low

Symptoms

  • Code turns active directly after a module programming session
  • Missing-message codes for interface modules A to D stored at the same time
  • High-voltage battery warning until the battery unit is reprogrammed

Inspection / repair

  • Difficulty: shop only
  • DIY: shop recommended

What Pro shows you for U033A

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 1 affected component(visible in Pro mode)
  • 2 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication