U0339
Software Incompatibility With Body Control Module B
Body control module B is a second body controller that takes over part of the switching, for example in a rear or auxiliary junction box. U0339 means a partner module rejects its software or setup; U0331 covers unit A, U0322 vehicles with a single body controller. Jaguar uses exactly this name: on the 2010 XF 5.0 V8 and the 2010–2011 XK, the auxiliary junction box, listed as body control module B, could drop the fuel pump relay after start, so the engine stalled once the high-pressure pump ran short; recall J017 loaded revised software and reconfigured that box. Ford has a BCM-B on 2022–2023 Mustang Stealth models, where a wrong configuration left the sill plates dark until program 23B60 reconfigured it with FDRS. U0142 is lost contact, U0443 invalid data. Usually no MIL.
Possible causes
- Body control module B carries a configuration that does not match the vehicle high
- Unit B left on an older software level after an update campaign medium
- Auxiliary junction box replaced without programming low
Symptoms
- Functions switched by the second body module fail, such as lights or sill plate illumination
- Depending on its tasks, engine may stall or not start
- Network codes in several modules after body module work
Inspection / repair
- Difficulty: shop only
- DIY: shop recommended
What Pro shows you for U0339
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 1 affected component(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.