OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Network generic / SAE

U0338

Software Incompatibility With Remote Function Actuation Module

The remote function actuation module receives key fob, passive entry and, on newer cars, phone key signals and passes lock, unlock or start requests to the body controller. U0338 means a partner rejects its software. No manufacturer documents U0338 publicly. Jaguar Land Rover shows the typical trap: RFA service parts FK72-19H440 for several Jaguar models from model year 2015 came loaded with software intended for dual-CAN cars, so in these multi-CAN cars the new module stayed silent towards the tester until its fuse was pulled and refitted and the module configured (SSM72557). For Land Rover models from 2010, JLR traces failed RFA downloads to low battery voltage, an interrupted diagnostic link or a corrupted file (SSM71856). U0214 is lost contact, U0515 invalid data. Keyless entry or start may fail.

SystemNetwork
Typegeneric / SAE
GroupU0
Range / number3 / 38

Possible causes

  • Replacement module shipped with software for another network layout high
  • Software download aborted by low voltage, a lost link or a corrupted file medium
  • Module fitted but not configured or keys not programmed medium

Symptoms

  • Remote or keyless locking does not respond
  • Keyless start refused or key not detected
  • Module not reachable by the diagnostic tool after replacement

Inspection / repair

  • Difficulty: shop only
  • DIY: shop recommended

What Pro shows you for U0338

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 1 affected component(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication