OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Network generic / SAE

U0336

Software Incompatibility With Restraints Control Module

The restraints control module reads the crash sensors and triggers airbags and belt tensioners according to a calibration written for one body style and equipment level. U0336 means a connected unit rejects the software or configuration of this module. Ford's 2014 code interpretation lists U0336 without the MIL marker. Jaguar Land Rover shows why the software level matters: replacement RCMs for the Range Rover Evoque came with software older than the factory level, the tester picked its update from the module content instead of the as-built data, and the unit stored B0002-13 until a manual patch fixed the choice (SSM74259). On 2013 Jaguar XJ AWD cars a generic RCM calibration failed FMVSS 208, leading to recall J040. U0151 is lost contact, U0452 invalid data. The airbag lamp stays on.

SystemNetwork
Typegeneric / SAE
GroupU0
Range / number3 / 36

Possible causes

  • Replacement airbag module delivered with an older software level and not brought up to the vehicle level high
  • Calibration for another body style, drive or equipment loaded medium
  • Used module from another vehicle installed low

Symptoms

  • Airbag warning lamp stays on
  • Further restraint codes such as airbag circuit faults stored
  • Code appears right after airbag module replacement

Inspection / repair

  • Difficulty: shop only
  • DIY: shop recommended

What Pro shows you for U0336

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 1 affected component(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication