U0335
Software Incompatibility With Hybrid/EV Battery Pack Sensor Module
The battery pack sensor module is housed in the traction battery, where it measures pack current and voltage for the battery controller. U0335 records that this controller or another partner rejects the module's software. Ford's 2014 code interpretation lists U0335 for the hybrid battery pack sensor module without a MIL marker. GM runs a comparable check in the Volt battery: its VITM compares the software versions of all slave modules 200 ms after power-up at 9 V or more and stores the maker-specific P1EB1 as Type A. Stellantis reprograms the battery pack control module and other units of the 2025 electric Dodge Charger and, if U029A for the sensor module remains, lets the car sleep for six minutes (08-028-25). U059B is invalid data. Lacking trustworthy readings, the vehicle can block driving or charging.
Possible causes
- Battery controller updated without matching the sensor module, or the reverse high
- Sensor module or contactor box replaced with a part on another software level medium
- Programming of the battery modules interrupted low
Symptoms
- Vehicle will not enter ready mode or drives with reduced power
- Charging does not start or stops early
- Range and state of charge shown incorrectly
Inspection / repair
- Difficulty: shop only
- DIY: shop recommended
What Pro shows you for U0335
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 1 affected component(visible in Pro mode)
- 2 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.